داکت RWD100*100

The base perforation of the wiring duct allows mounting on the panel or on Din mounting rails.
Duct material as Rigid PVC, self-extinguishing (non-flame propagating) and resistant to abnormal heat and fire up to 960°C (glow-wire test) in conforming with IEC/EN 60695-2-11 standards.
Product without Lead (Pb) in accordance with RoHS requirements.
Technical characteristics of PVC duct as shown in Table 5.
Complementary construction details as illustrated in Figures 1 to 5.
Duct dimensional details, as shown in Figures 6 and 7.
Nominal sizes and dimensions as shown in Table 1.
The thickness of wall, bottom and cover as shown in Table 4.
Standard length as 2 meters.
Operating instructions
The maximum application (operating) temperature as +60°C in accordance with IEC/EN standards.
The minimum storage/ transport temperature as -45°C.
The minimum installation/ application temperature as -25°C.
The number of conductors must not exceed the recommended values, considering 60% stuffing coefficient (Table 2).
Suitable for small sized wires employed in electric and electronic control panels.
The deformation of horizontal duct walls under recommended conductor loading has been subjected to limited investigation.
The acceptability of deformation under more rigorous conditions such as load bearing cover or required mechanical spacing must be evaluated in the end-use investigation.